Piano Disposal

Guide · Homeowners · 4 min read · Updated 16 November 2026

How Is a Piano Removed? Upright and Grand Explained

Short answer

An upright piano is tilted onto a padded piano board, strapped down and wheeled or carried out by two or three handlers. A grand piano has its lid, legs and pedal lyre removed, then the body is turned on its straight side onto a skid board and strapped. Both are loaded onto a van, taken away and dismantled so the frame, strings and timber can be recycled.

Grand piano keys

The equipment piano handlers use

Piano removal is about control rather than strength. The weight of a piano sits low and towards the back, where the iron frame is, so it tips unexpectedly if handled like ordinary furniture. Professional crews use kit designed to keep that weight managed throughout the move. Before anything moves, the crew walk the route, check door widths and stair turns, and protect floors, door frames and banisters. The lid and fallboard are secured, and any castors are checked, as old castors often seize or break.

  • A padded piano board or skid board that the instrument is strapped onto
  • Heavy-duty dollies for level floors and paths
  • Webbing straps and shoulder harnesses for carrying on steps
  • Floor protection sheets and boards for carpets, wooden floors and lawns
  • Ramps for kerbs, steps and loading onto the van

Removing an upright piano

With the route clear, the crew tilt the upright back and slide the board underneath, then strap the piano firmly to it. On level floors it moves on a dolly. At steps and stairs, handlers take positions above and below, with the strongest handler usually on the downhill side, and the piano is walked down a step at a time on the board, never allowed to bump. Half-landings may need the piano to be stood more upright to make the turn. Outside, boards or ramps bridge thresholds, steps and soft ground. At the van, the piano is wheeled up a ramp or onto a tail lift and strapped in place for transport.

Upright pianos must stay upright or near upright during the move. Laying an upright flat on its back can strain the case and is much harder to control on steps, so experienced crews keep it standing on the board and only tilt it as far as the route requires. Keeping it upright also protects the action and keys inside the case from shifting.

Removing a grand or baby grand

A grand has to be partly taken apart before it can leave a room. The lid is unhinged and wrapped. The crew then raise one side, place a padded skid board alongside and remove the leg on that side. The piano is lowered onto its straight side on the board, the remaining legs and the pedal lyre are taken off, and the whole body is strapped tightly. Legs, lyre and lid travel separately. On its side, a grand is narrower but long, so the route needs space for turning. Three or four handlers are usual.

InstrumentTypical crewMain steps
Small uprightTwoBoard, straps, dolly, ramp
Large or overstrung uprightTwo or threeBoard, straps, extra handler on stairs
Baby grandThreeLid, legs and lyre off; body on side on skid board
Full or concert grandThree or fourAs baby grand, with more room needed to turn
Digital piano or organOne or twoPartial dismantling for stairs; electronics to WEEE recycling

When the piano must be dismantled in the room

If the piano cannot pass through the route in one piece, it is dismantled on site. The strings are slackened carefully first, because they hold the frame under very high combined tension. Cutting strings under tension can make them whip with real force, which is why experienced crews de-tension before anything else. The action and keys come out next, then the case panels, and finally the iron frame, which may be broken into sections. This work is noisy and creates dust and debris, so floors are sheeted and the crew clean up before leaving. Every part is taken away.

What can go wrong and how crews avoid it

The most common problems are seized castors, rotten legs on old uprights and routes that turn out narrower than described. Crews check castors and legs before tilting, and do not rely on them to take weight on uneven ground. Grand piano legs can be stiff to unbolt after decades in place, and the crew support the body throughout so it never rests on a single leg. On stairs, the main risk is the piano gaining momentum, which is why it is moved one step at a time with handlers above and below, strapped to the board. Measuring every pinch point in advance, and sending photos, prevents most surprises on the day.

What happens after collection

Back at a yard or recycling site, pianos removed whole are dismantled in the same order. The cast-iron frame and steel strings go for metal recycling. Solid timber, veneered panels and keys are separated so wood can be reused or recycled, while felts, cloth and small parts go to suitable waste routes. Electronic organs and digital pianos are electrical equipment, so their circuit boards, speakers and wiring go through WEEE recycling under the WEEE Regulations 2013. You should receive a waste transfer note or receipt naming what was taken.

How to prepare for removal day

Clear the piano of ornaments, photos and music, and empty the stool if it is going too. Move rugs, small furniture and plants from the route, and make sure doors can be opened fully, taking them off their hinges if necessary. Tell us about any steps, gravel or lawns on the way to the road, and reserve parking if you are in a permit zone. Keep children and pets out of the way while the piano is moving. If the piano has been in place for many years, expect some dust and perhaps lost items behind and underneath it. Have a vacuum ready for the space it leaves, and check the floor beneath for indentations from the castors, which are common on carpet and soft wood.

Questions people also ask

How long does piano removal take?

A straightforward ground-floor upright usually takes under an hour from arrival to departure. Stairs, long carries and grand pianos take longer, often one to two hours. On-site dismantling of a piano that cannot leave the room whole can take several hours, depending on the instrument and the space available.

Will removing the piano damage my floors or walls?

Professional crews protect floors, door frames and banisters with sheets, boards and padding, and move the piano on a board rather than dragging it. Tell us about delicate surfaces such as polished wood, stone or fresh paint, so extra protection can be brought.

Can a piano be taken out through a window?

Occasionally, where it was originally lifted in that way, but window removal and lifting equipment add considerable cost and planning. In most cases dismantling the piano in the room is simpler and cheaper when it cannot pass through doors and stairs.

Written and checked by the Piano Disposal team. Read our editorial policy.

Get a free piano disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote